Choose The Right Tile Adhesive

When you’re planning a tiling job, you naturally want the best tiles, but it is equally as important to choose the right adhesive for the job. The Dunlop Tile Adhesive Selector will help you to easily choose the right tile adhesive for your job. All you have to do is select the area to be tiled, the surface you are tiling onto and your tile type and we will provide you the best Dunlop Tile Adhesive for your job, so your surface looks better for longer.

 

Please select the area you will be tiling:

Internal Floor
External Floor
Internal Wall
External Wall

Step 2 - Please select your tile type

Step 1 - Please select your substrate type

Step 2 - Please select your tile type

Step 1 - Please select your substrate type

Step 2 - Please select your tile type

Step 1 - Please select your substrate type

Step 2 - Please select your tile type

Step 1 - Please select your substrate type

It looks like the product is not available. Please contact us:

  • Contact Us

Disclaimer: The technical details, recommendations and other information contained in this sheet are given in good faith and represent the best of our knowledge and experience at the time of issue. It is your responsibility to ensure that our products are used and handled correctly and in accordance with any applicable Australian Standard, our instructions and recommendations and only for the uses they are intended.

We also reserve the right to update information without prior notice to you to reflect our ongoing research and development program. Country specific recommendations, depending on local standards, codes of practice, building regulations or industry guidelines, may affect specific installation recommendations. This guide is intended as a quick reference selector only; please always refer to the latest product datasheets for specific instructions. ARDEX make no claim on tile performance in the above situations; please refer to the tile manufacturer to ensure the tile is suitable for the application intended.

If you have any further questions or would like further clarification, please contact the DUNLOP Hotline on 1800 222 841 (AU) and 0800 224 070 (NZ) (9am to 5pm Monday to Friday). Notes: Refer to Technical Bulletin DTB010.001 for Fixing of Moisture and Thermally Sensitive Natural Stone and Manufactured Tiles. For tiling on Existing Tiles, please refer to the relevant Dunlop Tile Adhesive Datasheet for surface preparation as in the majority of instances the suitability is for dry areas, not permanently immersed situations and the tile glaze must be removed. Slate is not a suitable substrate to be tiled over due to its instability. When tiling with Slate (non-sensitive, always conduct a trail application) Tiling on Internal Timber references particleboard and plywood. All floors must have adequate falls to waste where applicable in wet areas.

Please contact the Dunlop Technical Hotline to discuss your recommendation on 1800 222 841 (AU) and 0800 224 070 (NZ) (9am to 5pm Monday to Friday) or email your enquiry to TechnicalServices@ardexaustralia.com