Surface Preparation

 CalculatorVideoProduct DataMSDS AustraliaMSDS New Zealand
Dunlop Primer & Additive  
Dunlop Multipurpose Primer  

Waterproofing

Repair

Floor Levelling

Tile Adhesive

Flooring Adhesives

Grouts & Silicone

Roofing

 CalculatorVideoProduct Data SheetMSDS AustraliaMSDS New Zealand
Dunlop Tile Pointing  

Render

Cleaning, Sealing & Polishing

 

Dunlop Tile Pointing

Area to be covered in linear metres

How to calculate in linear metres:
Measure the length of the surface in metres.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Ready-to-Go Render

Area to be rendered in m2

How to Calculate in m2:
Measure the width and the length of the area in metres and multiply the width and the length togeher.

Ï

Application thickness (mm)

Guide for thickness:
The Dunlop Ready-to-Go Render can be used to achieve an application thickness of between 1-5mm

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Perfect Polish

Floor area to be polished in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Polish Prep

Floor area to be prepared in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Multipurpose Fine Coat Render

Area to be rendered in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

Application thickness (mm)

Guide for thickness:
The Dunlop Multipurpose Fine Coat Render can be used to achieve an application thickness of between 2-5mm

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Natural Look Sealer

Area to be sealed in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Grout Sealer

Tile length in mm:

Tile width in mm:

Joint width in mm:

Area to be sealed in m2:

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Multipurpose Acrylic Render

Area to be rendered in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

Application thickness (mm)

Guide for thickness:
The Dunlop Multipurpose Acrylic Render can be used to achieve an application thickness of between 2-10mm

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Undertile Waterproofing

Wall area to be waterproofed in m2

Floor area to be waterproofed in m2

How to Calculate in m2:
Measure the width and length of the area in metres.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Damp-proof Waterproofing

What level of damp-proofing is required?

 

Wet Area Waterproofing

Wall area to be waterproofed in m2

Floor area to be waterproofed in m2

How to Calculate in m2:
Measure the width and length of the area in metres.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Flexible Coloured Grout

Tile length in mm:

Tile width in mm:

Joint width in mm:

Joint depth in mm:

Area to be grouted in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

Grout/m2 (no wastage allowed) kg/m2:   

Grout/m2 (with 15% wastage) kg/m2:   

You will need with 15% wastage:

Product Colour:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Ready-to-Go Coloured Grout

Tile length in mm:

Tile width in mm:

Joint width in mm:

Joint depth in mm:

Area to be grouted in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

Grout/m2 (no wastage allowed) kg/m2:   

Grout/m2 (with 15% wastage) kg/m2:   

You will need with 15% wastage:

Product Colour:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Wide Joint Grout

Tile length in mm:

Tile width in mm:

Joint width in mm:

Joint depth in mm:

Area to be grouted in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

Grout/m2 (no wastage allowed) kg/m2:   

Grout/m2 (with 15% wastage) kg/m2:   

You will need with 15% wastage:

Product Colour:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Ultra-White Grout

Tile length in mm:

Tile width in mm:

Joint width in mm:

Joint depth in mm:

Area to be grouted in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

Grout/m2 (no wastage allowed) kg/m2:   

Grout/m2 (no wastage allowed) kg/m2:   

You will need with 15% wastage:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Grout Paint

Tile length in mm:

Tile width in mm:

Joint width in mm:

Area to be painted in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Product Colour:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Multipurpose Primer

Area to be primed in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Primer & Additive

Select what you will be priming:

 

Dunlop Multipurpose Floor Leveller

Area to be levelled in m2

How to Calculate in m2:
Measure the width and length of the area in metres.

Application thickness (mm)

Suggested application thickness:
The Dunlop Multipurpose Floor Leveller can level from 0-10mm without the addition of aggregate and 10-25mm with the addition of 2-5mm aggregate.

You will need:

Disclaimer: Coverage will vary according to method of application, substrate condition and on site conditions, the above is designed for guidance only.

 

Dunlop Ardit Floor Leveller

Area to be levelled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

Application thickness (mm)

Suggested application thickness:
The Dunlop Ardit Floor Leveller can level from 0-10mm without the addition of aggregate and 10-50mm with the addition of 2-5mm aggregate.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Timber Floor Leveller

Area to be levelled in m2

How to Calculate in m2:
Measure the width and length of the area in metres.

Application thickness (mm)

Guide for thickness:
The Dunlop Timber Floor Leveller can level from 0-12mm without the addition of aggregate and 12-30mm with the addition of 2-5mm aggregate.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Ardit Rapidset Repair Mortar

Area to be patched/ramped in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

Application thickness (mm)

Guide for thickness:
The Dunlop Rapidset Repair Mortar can be used to patch from feather edge to any thickness.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Floor Repairer Rapid Patch

Area to be patched/ramped in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

Application thickness (mm)

Guide for thickness:
The Dunlop Floor Repairer Rapid Patch can be used to patch from feather edge, 0mm to any thickness. Ideal for ramping from a feather edge to normal screed thicknesses - 15mm to 30mm.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Vinyl Adhesive

Area to be covered in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

Dunlop Ready-to-Go Vinyl Adhesive

Area to be covered in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Tile-All Plus

 

Dunlop Tile-All

Wall area to be tiled in m2

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

 

 

Dunlop Ready-to-Go Tile-it

Area to be tiled in m2

How to Calculate in m2:
Measure the width and length of the area in metres.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Coloured Silicone
Dunlop Construction Grout

Select the desired consistency:

Dunlop Universal Tile Adhesive

Wall area to be tiled in m2

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Multipurpose Mastic Adhesive

Wall area to be tiled in m2

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Super Tileset

Wall area to be tiled in m2

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Rapidflex

Wall area to be tiled in m2

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Trade Resaflex

Wall area to be tiled in m2

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Premixed Resaflex

Wall area to be tiled in m2

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Wall & Floor Tile Adhesive

Wall area to be tiled in m2

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Premixed Mastic Adhesive

Area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Wallfix Tile Adhesive

Wall area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Floorfix Tile Adhesive

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Wall Tile Adhesive

Wall area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Floor Tile Adhesive

Floor area to be tiled in m2

How to Calculate in m2:
Measure the width and the length in metres and multiply the width and the length together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Carpet & Cork Tile Adhesive

Select surface type:

Carpet Tile Adhesive

Select how you will apply the adhesive:

Dunlop Artificial Grass Adhesive

Area to be covered in m2

Area to be covered in m2

How to Calculate in m2:
Measure the width and length of the area in metres.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions; the above is designed as a guide.

Dunlop Butynol Waterproofing Adhesive

Area to be covered in m2

How to Calculate in m2:
Measure the width and length of the area in metres and multiply the length and the width together.

You will need:

Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed for guidanceas a guide.